1972 GMC Suburban 67-72 3 door C10

Description for Chevrolet Suburban 1972

1972 GMC SuburbanFactory 4x4, NP205 Transfer case, locking hubsAll 3 seats have been reupholstered and the headliner is new. The headliner is the original style not an aftermarket cardboard piece. All of the glass is intact, no hazing. The wood floor in the trunk is solid, no water damage or soft spots. All doors, fenders and hood are in decent shape. The only rot is in the rocker panels and a couple of small spots on the rear quarter panels. The passenger rear quarter panel has some bad/incomplete body work from the previous owner, it was never fully welded and covered with bondo which I already stripped to bare metal(only surface). The engine is an LS 6.0L LQ9 from a 2008 escalade. The computer and harness have been reworked and flashed removing ALL emmisions. A diagnostic port, check engine light, and fuse block were added. This is a drive by wire engine and clomes with the electronic pedal and harness. The truck currently has a TH350 and comes with a speed sensor to communicate with the computer but all of the wiring is still intact in the harness if you want to run a 4L60E. I have factory exhaust manifolds without the O2 sensor ports. This Suburban was not a factory A/C vehicle but I do have a factory A/C dash and rear roof mounted A/C housing from another factory A/C vehichle..
This auction includes the following new in the box parts-never been installed;Edelbrock fuel sytsem, lines, connectors, and 2 walbro fuel pumps. everythhing you need to plumb the fuel system(new fuel tank is already mounted)sensor that allows the TH350 to comunicate with the ECM.Exhaust manifold gaskets and hardware.upper and lower radiator hosesRadiatordual electric fans with shroudDIY4x4.com B52 kit, 4"superlift kit. when combined provides 8" of lift. ALL parts needed for the lift kit are included. shocks, leaf springs, drop pitman arm, brake lines, U bolts and bushings. Rear shackle flip is already installed.repair panels for the innner and outer rocker panels for all 3 doors.Some of the parts listed are not in the pictures. i can send pictures more pictures upon request.
From the best that I can tell, I have all the parts needed to make the suburban run. The motor is already mounted. The only thing left is to plumb/install the fuel and coolant systems. The vehicle is located in Homestead Fl 33030 and will need to be trailered or towed. Vehicle comes with a clear Florida title.The suburban is for sale locally and I reserve the right to end the auction due to a local sale. Shipping if required will be the responsibility of the buyer. I can assist with loading.