RESTORED & REBUILT 1980 CORVETTE NEWER PAINT, INTERIOR & CRATE MOTOR WITH VIDEO

1980 Chevrolet Corvette for sale in Mission Viejo, California, United States

Condition: Used
Item location: Mission Viejo, California, United States
Make: Chevrolet
Model: Corvette
Type: Coupe
Year: 1980
Mileage: 38000
VIN: 1Z87HAS417576
Color: Maroon
Engine size: 305
Number of cylinders: 8
Power options: Air Conditioning, Cruise Control, Power Locks, Power Windows
Fuel: Gasoline
Transmission: Automatic
Drive type: RWD
Interior color: Doeskin
Vehicle Title: Clear
Want to buy? Contact seller!

Description for Chevrolet Corvette 1980

A LIFELONG CALIFORNIA/ ARIZONA CAR: BETWEEN THE LAST LONG TIME TWENTY PLUS YEAR OWNER AND MYSELF, WE'VE ACCUMULATED APPROXIMATELY $40K IN RESTORATION RECEIPTS! IN OTHER WORDS, THIS CLEAN CAR HAS JUST ABOUT HAD A FRAME ON RESTORATION WITH NO EXPENSE SPARED. PLEASE FEEL FREE TO CALL US WITH ANY QUESTIONS (760) 283-7098.
EXTERIOR
The body is straight with sharp lines and retains the factory polyurethane bumpers altogetherrepaintedin the factory Dark Claret Metallic (e.g. Maroon) Corvette color. The paint has a few to a handful of nicks which have been touched up over the years. The doors also open and close nicely.
The tinted glass keeps the car noticeablycooler and all of the weatherstrip is new: remaining soft to the touch. The glass t-tops (which are VERY nice for their age) actually have New Old Stock (NOS) GM weatherstrip. The front air dam has also received new rubber sweeps.
The headlight system has been completely restored with factory reproduction color coded vacuum lines, new headlight actuator cans and seals, and diverter valves: both headlights pop up and go down quickly (but could use some WD-40 on the pivot points.) All of the exterior lights work.
The new updated aluminizedexhaust system (doesn't rust) sounds great and looks beautiful! As you can also see in the pictures, the spare tire carrier is clean and has never had a jack put underneath it. In fact, the original spare tire still has its little nubs and appears to have never been on the ground!
INTERIOR
The original factory optioned doeskin leather interior has been almost completely restored with new Corvette America dash, new reproduction seat covers, new reproduction door panels and new custom molded reproduction carpet sporting a brand new set of Corvette cross flag Lloyd's floor mats.
Additionally, the speedo/ tach lens, the center gauge cluster bezel and the shifter console bezel are all new reproductions. All of the interior lights are functional and all of the gauges work save the clock which Corvettes are only optioned with so owners know what time their car left the factory. The power door locks and the power windows all work well. The parking brake is also functional.
We installed a wireless Bluetooth amp with all four new speakers to play music/ radio directly from mobile phone apps. And while complete: the cruise control is the only feature I don't believe is presently functional on the car.
MECHANICAL
The car has a received a new factory good wrench GM 305 cubic inch crate motor mated to the rebuilt factory transmission and this car is quick, don't forget it has a crate motor!(I think these cars were detuned from the factory/ HP ratings were re-calculated using different metrics for emission's standards compliance.) Regardless, the drive-trainis responsive, goes through all the gears well and will put you back in your seat!When a potential buyer came out for a test drive, he was similarlyimpressed with the car's get up and go.
There are less than 15k miles on the altogether new drive train which received too many new components to list including a new fan clutch, water pump, alternator, a/c compressor and all new power steering components including the power steering control valve, power steering ram, pump and four new hoses. The A/C system has been updated to R-134 and the compressor clicks over when switched on but it is probably die for a recharge.Additionally, the standard crate motor "Mr. Goodwrench" GM steel valve covers were on the car when purchased, so I picked up a set of factory finned aluminum high horse valve covers, had them polished and installed them because they look so cool!
When I took the car in for an emissions inspection, I added a Dr. Rebuild factory reproduction vacuum hose kit and paid for a high dollar show quality rebuilt of the carburetor (which included correct re-annodization.) You'll also note the new four-row aluminum radiator which keeps the car so cool I've only seen the temperature gauge go over 165 degrees twice.
Much detail has been paid to both the front and rear suspensions as you can see in the pictures. The front suspension was highly detailed with several custom painted components (partially covered by the newly installed inner fender suspension flaps) when all new a-arm and sway bushings were replaced together with all new ball joints, tie rod ends, springs and idler arm. When all four brake calipers were replaced with upgraded stainless steel sleeved units and pads: they were similarlytreated to custom red paint the same as the pictured suspension components. The rear suspension has also received new strut rod bushings, new spring and spring bushings as well. Lots of pride of craftsmanship has been taken making this car beautiful top to bottom.
You'll also notice the brand new tires mounted to the factory original slotted aluminum wheels professionally polished and restored with repainted "windows" (e.g. slots.) I wouldn't hesitate to drive this car anywheresave the fact that I have worked so hard keeping it clean!
There is a YouTube video of this Corvette beneath the pictures and at the bottom of this page showing the speedo/tach/gauges over a 15 minute trip up and down the highway so that you can see how quick the car is but fair warning: the color and sound are not entirely exact/ accurate. If you fast forward to approximately minute "14" you can see the walk of the car we did at the park.Please enjoy the below pictures and details about this classic 1980 Corvette!
CONTACT US
Please feel free to call us with any questions: (760) 283-7098. The car is located in Mission Viejo, CA (about 45 miles South of Los Angeles) and I can help arrange shipping anywhere in the lower 48 States for around $1000 or anywhere in the world for that matter.

PRODUCTION OPTIONS AND STATISTICS

REGULAR PRODUCTION OPTIONS (RPO)
RPODescription Price Production
1YZ87Base Coupe $13,140.24 40,614
AU3Power Door Locks $140 32.692
CC1Removable Glass Roof Panels $391 19,695
C49Rear Window Defogger $109 36,589
K30Cruise Control $123 30,821
LG4305 CID, 180 HP Engine -$50 3221
MX1Automatic Transmission $0.00 34,838
N90Aluminum Wheels $407 34,128
QXHWhite Letter SBR Tires, P225/60R15 $42 13,140
UN3AM/FM Radio, stereo w/ cassette $163 15,148
U75Power Antenna $56 32,863
U81Dual Rear Speakers $31 36,650
YF5California Emissions Certification $250 3,221


1980 COLOR OPTIONS
RPOExteriorProduction

50/74 Dark Claret Metallic3,451

RPO Interior Production
592 Doeskin Leather 7,310

DECODING THE 1980 CORVETTE VEHICLE IDENTIFICATION NUMBER:
Total 1980 Corvettes Built - 40,614
Serial numbers: 1Z87xAS400001 through 1Z87xAS440614
The "Vehicle Identification Number" (also VIN or serial number) is stamped on a plate on the inner vertical surface of the left windshield pillar visible through the windshield.
PositionCharacterDescription
11Chevrolet Division
2ZCorvette
3-487Coupe
5HCalifornia LG4 305 CID V8, 180 HP
6A1980
7SAssembled in St. Louis, MO
8 to 13417576Birthdate of this 1980 Corvette: February 11, 1980

ENGINE SPECS: RPO LG4



Block
Displacement305 cid (5.0 liters)
Bore & Stroke3.735 x 3.48"

Compression Ratio8.5:1

Brake Horsepower180 @ 4200

Torque255 lb-ft @ 2000

Main BearingFive
Valve LiftersHydraulic
Fuel SupplyRochester Quadrajet


STATISTICAL SPECS:
Wheelbase98 inches (2.489 m)
Overall Length185.2 inches (4.704 m)
Overall Width69.0 inches (1.753 m)
Overall height48 inches (1.219 m)
Ground Clearance4.5 inches (11.4 cm)
Front Tread58.7 inches (1.491 m)
Rear Tread59.5 inches (1.511 m)
Wheel Size15 x 8 inches
TiresP225/70R-15 SBR (steel-belted radial)
PositractionStandard
SteeringRecirculating ball
Front SuspensionIndependent, unequal-length control arms with ball joints, coil springs, and stabilizer bar
Rear SuspensionIndependent, trailing link, transverse semi-elliptic leaf springs
BrakesHydraulic, vented four wheel discs; 11.75-inch diameter, single calipers
IgnitionHEI electronic
Body ConstructionSeparate fiberglass body and box-type ladder frame with cross-members
Fuel Tank24 US Gal (20 Imp Gal) (91 liters)























<






PLEASE COPY AND PASTE THE FOLLOWING LINK TO A YOUTUBE VIDEO SHOWING SPEED, TACH, GAUGES, WIPERS AS WELL INDICATOR, DASH AND COURTESY LIGHTS WORKING OVER AN APPROXIMATE 15 MINUTE DRIVE ON THE HIGHWAY AND SURFACE STREETS. THE NEW CRATE MOTOR MAKES THIS CAR QUICK AND THE REAR END GEAR RATIO KEEPS THE RPM'S DOWN AT SPEED. THE VIDEO'S COLOR AND SOUND ARE LESS THAN PRECISE (TAKEN WITH A SONY HANDY-CAM) BUT YOU CAN FAST FORWARD TO "MINUTE 14" FOR BEAUTIFUL EXTERIOR FILM OF THE CAR:
https://www.youtube.com/watch?v=qvOID-mAoB0&feature=youtu.be
Other classic cars for sale