NO RESERVE!!!! 1991.5 DODGE RAM FIRST GEN 5.9 FULL RESTORATION.

1991 Dodge Ram 2500 for sale in Farmington, New Mexico, United States

Item location:	Farmington, New Mexico, United States
Make:	Dodge
Model:	Ram 2500
Type:	Standard Cab Pickup
Year:	1991
Mileage:	151615
VIN:	1B7KM26C3MS363347
Color:	Blue
Engine size:	5.9L
Number of cylinders:	8
Power options:	Air Conditioning, Cruise Control, Power Locks, Power Windows
Transmission:	Automatic
Drive type:	4WD
Interior color:	Gray
Options:	air conditioning, power windows, 4-Wheel Drive, Cassette Player
Vehicle Title:	Clear
Want to buy?	Contact seller!

Description for Dodge Ram 2500 1991

NO RESERVE!!!!

1991.5 first GenerationDodge Ram W250 which is the intercooled 5.9L turbo engine. I am the third owner, I purchased in 2016 from the second owner in Grand Junction, CO who only had the truck a couple of months. The first owner was from Oregon and had an overhead camper in the truck. When I bought the truck it was all stock, peeling original paint but no rust. We had it sand blasted and repainted to original color. The paint looks like it just rolled off the show room floor. The upholstery was in great shape. We did install new carpet and reupholstered the bench seat. Door panels are all original and look great. New headliner installed. All the trim, badging and bumpers are original. We installed the Kelderman airbag system along with a 4" lift. Fuel wheels with Toyo tires. We put anew steering box, new tie rods and rebuilt the braking system. New radiator, hoses and water pump. We installed the KDP kit, resealed the front seal and oil pan. Installed a set ofbosch injectors, a reman turbo from a 1996, 4" stainless exhaust with muffler, fuel pin and governor spring. Everything on the truck works as it should. all gauges work, AC blows cold, 4x4 works,all power equipment works.... you can call or text me for more info... clay (505)402-1558. i can get more pics or videos running if you would like.

selling no reserve because I need the money right now!! below is a description of why I listed the truck as a 1991.5 model year. 1991 was a split yearand this explains itmuch better than I can!!

1989-1993 Dodge 5.9L 12 Valve Cummins Tech Information

We will address the 1989-1993 first generation trucks in a few sections.

In 1989, Dodge introduced the D250 & D350 first gen pickup powered by a 5.9L Cummins diesel. This engine featured 160hp & 400ft-lbs of torque. The 1989-1991.0 trucks were a non-intercooled engine and ran a large bowl style piston.This piston style is popular for use in high horsepower builds in 1994-1998 trucks because you can run more timing without having the injector spray outside the piston bowl.

In 1991.5, Dodge introduced an intercooled version of the 5.9L Cummins. HP ratings remained the same, but the piston style was changed to a smaller bowl and the compression ratio was upped slightly. This engine ran until the 1993 model year.
The injection pump on 1991-1993 Dodge trucks is a "VE" rotary injection pump. It is supplied by a mechanical lift pump, driven off the cam shaft that generally produces 3-5PSI of pressure. If your fuel pressure drops below 3PSI, Cummins recommends replacing the lift pump.Click here to see our VE Cummins replacement mechanical lift pumps and upgraded electric fuel pump selection.
1989-1991 non-intercooled trucks use a different injection pump "version" than 1991.5-1993 trucks. Keep this in mind when ordering a reman injection pump for your truck. 1991.5-1993 VE injection pump cores are hard to come by, so in most cases when you order a reman pump, you'll have to send in your core to be rebuilt.
Check our ourreman VE fuel injection pumps here. We offer stock rebuilt pumps and performance pumps that feature aperformance fuel pin and 3200RPM governor spring, along with a "maxed out" fueling calibration.For cold temperature starting, the 5.9L Cummins features an air intake grid heater, not glow plugs. This style is basically similar in design to a toaster element. In the intake plenum, there is a heater element that pre-heats air before it enters the engine. Not only do these elements heat up to assist with cold starting, they can also cycle on & off for several minutes after the engine is running to help reduce white smoke. You may notice your lights dimming and then brightening shortly after several times. This is normal operation in cold weather. Fueling upgrades:
1989-1993 5.9L VE Dodge Ram Cummins trucks run well, and were at the top of their class towing wise, but there are some improvements that make these engines run a lot better.These engines were governed at around 2500RPM. This made driving a 5 speed manual truck kind of frustrating, as you couldn't "wind out" the gears very well, just as the engine was making power, it hit the "rev limiter".
A hugely popular modification is the3200RPM governor spring. This will give your power band an additional 700RPM, greatly improving the driving experience.
Aperformance fuel pinis another popular upgrade. This allows the injection pump to flow more fuel, allowing for gains between 25 & 40hp.For more power, we have a large selection ofperformance fuel injectorsas well.Turbo upgrades: The 1989-1993 all featured an H1C non-wastegated turbocharger. The 1989-1991 trucks had a 18CM exhaust housing, and the 1991.5-1993 trucks had a 21CM exhaust housing. The stock housings allowed for good flow in the upper rpm's, but leave something to be desired in the bottom end (low rpm) power department. Changing your turbo's turbine housing to a16CM turbine housingwill bring your turbo boost on early in the RPM range, resulting in better responsiveness in lower RPM's and less black smoke. This is a relatively easy thing to change and requires no exhaust modifications to make it work.Achilles Heel:
ALL 5.9L Cummins from 1989-2000 have a potentially catastrophic ticking time bomb in them. On the front of the block, there is a alignment dowel that centers the timing gearcase on the block. The gearcase slides over this dowel, and the hole is open-ended. What happens is, over time, the dowel pin, which is tapped into place in the block, vibrates loose and comes out the front hole. The pin then drops into the gears. If you are lucky, the pin will somehow make it to the oil pan and not cause any carnage.
Usually though, the pin will drop into the gears and then get forced between the pump gear or cam gear and thetiming gearcase housing. When this happens, it cracks the housing or sometimes a large chunk of the case is displaced, causing a massive oil leak. Replacing the gearcase involves removing the cam shaft from the engine, or at a minimum, removing the cam gear, leaving the cam in the engine. Either way, this repair can cost upwards of $1500 with labor.
Worst case situation? The dowel pin can drop into the gears and break the cam gear, causing piston to valve contact. One rare case reported that the pin locked up the engine so quickly it caused the crank shaft to break. Either way, it isn't something you want to deal with.
We offer aKDP Repair Kit for the 1989-1993 5.9L Cummins here.It basically provides a dowel pin "tab" that installs over the hole where the dowel pin comes through, preventing it from ever dropping.If you just bought a Cummins and have a front seal leak, now is the time to tab the dowel pin.This issue is more of a "when" issue than a "if" issue. At some point the dowel pin will vibrate loose. It may happen at 150,000 miles or it might happen at 700,000 miles, but it will happen sooner or later. Better to fix it before it creates an expensive repair.