1934 Ford Tudor Supercharged HOT Street Rod Henry Ford Steel -Ruby- A/C -Custom

Description for Ford Model A 1934

Please allow ample time for our high resolution photos and video to load. Thank you.

1934 Ford Tudor Street Rod

" Supercharged "

as presented by...
Texas Classic Cars of Dallas

Classic & Special Interest Automobile Consignment & Sales

1912 W. Mockingbird Lane

Dallas, exas, 5235

Dave at 214-213-7072 or Maris at 214-616-2317

ENJOY OUR VIDEO BELOW

Video Link to YouTube Video of this '34 Hot Rod - https://www.youtube.com/watch?v=ahv7zV8FtyU

Texas Classic Cars of Dallas is proud to showcase this exquisite 1934 Ford Tudor chopped street rod. This car underwent an extensive 3-year build, ompleted in the early 1990s. We have an extensive album with every specification, iring diagram, nd categorized list of everything done to this car. Enjoy our presentation and feel free to contact Dave at 214-213-7072 or Maris at 214-616-2317 with any questions.

SUMMARY OF FEATURES :

355 cubic inch Forced-Induction-Built Balanced& Blueprinted SBCV8 - 500HP / 500TQ

TH400 3-Speed Automatic Transmission / 3200 Stall Converter

9-Inch Ford Rear End - 3.50:1 Gears - Traction Lok

Vintage Air Conditioning

Front Disc Brakes / Rear Drum Brakes

Henry Ford Steel Body & Doors - Fiberglass Fenders

Rack & Pinion Steering

Autometer Gauges

Tilt Steering Column & LeCarra Polished Billet & Leather-Wrapped Steering Wheel

1832 Ford Chassis - Boxed & Modified - IFS Aluminum Front Suspension

TOO MUCH TO LIST! - ENJOY OUR PRESENTATION

The paint is urethane base/clearcoat in GM Medium Red Metallic, PG paint components were utilized exclusively during this quality restoration. This car was completed in the early 1990s and has been garage-kept. There are a few paint flaws on close inspection, .i. a quarter sized hairline crack in the paint near the passenger door handle and a similar paint crack on the ribbed roof panel, ltogether a high quality paint finish that has been well cared for over the years.

BODY DETAILS :

1934 Tudor Sedan / Chopped 4.5 Inches / Henry Ford Steel Body & Doors / Ribbed Steel Roof Panel / Cowl Air Vent & Cowl Light Holes Filled

The hood is 1934 Henry Ford Steel.

The doors are 1934 Henry Ford Steel. The handle stanchions are turned 90 degrees. The windshield is non-tinted auto safety glass while the side windows are grey tinted. The grille assembly is 1934 Ford, hromed with SS liner. The running boards are steel, y Anderson Industries. The fenders are fiberglass.

Under the steel hood cowls resides a stout professionally built, alanced & blueprinted 355 cubic inch smallblock Chevrolet V8. This B&M supercharged V8 produces approximately 500 horsepower & 500 ft-lbs of torque. It churns out about 10 psi of boost at 5,000 rpms. A cast iron 4-bolt block was chosen for the build. The block was decked .010, e-burred, apped and vatted prior to the engine assembly. This powerplant was put together in 1991. The crankshaft is forged steel. The pistons are TRP forged aluminum (.030 over) with 21cc dish (blower pistols) The crowns were treated to a thermal barrier coating during the engine build. Plasma ceramic rings were installed. The oil pan is a 6-quart Chevrolet pan complete with a windage tray and screen. There is so much to list about this amazing car and build components.

The top end of the engine was fitted with Air Flow Research aluminum 75cc 8.2:1 compression cylinder heads. The intake valves are 2.05" while the exhaust valves are 1.6" A Comp Cams roller cam and roller hydraulic lifers have been installed along with upgraded springs and rocker arms. The timing chain is an Edelbrock True Roller. This is a forced induction engine, itted with a polished B&M Powercharger (250CID) driven at 40% overdrive and producing approximately 10 psi at 5000 rpms. The blower runs a 2-inch Gilmer toothed belt to help prevent slippage. Fuel induction duties consist of dual Holley 600cfm carburetors, uilt and tuned especially for this application. The ignition system features a Summit Racing Street/Strip CD Ignition with an MSD Blaster coil, .5mm Super Conductor wires and R&M Specialties spark plug wire looms. The distributor is a Mallory Comp 9000 with vacuum advance. The alternator is polished aluminum, y Street & Performance. The starter is a Powermaster unit (Delco)

The air conditioning system features components by Vintage Air, Sankyo compressor, raided stainless lines & AN fittings.

The handle this powerful supercharged V8's cooling duties, Griffin aluminum radiator is utilized. There is also an engine oil cooler with AN fittings, rofessionally mounted of course. The upper radiator hose is polished by Street & Performance. The water pump is by Stewart with an aluminum double grove pully. The cooling system has been treated to help prevent corrosion.

The custom exhaust system features Sanderson headers (1-5/8 primaries & 3-inch collectors) The headers have been HPC coated inside and out for improved heat dissipation. The mufflers are DynoMax Super Turbos.

The chassis is beautifully done. The rails and K-member are 1934 Ford. This car rides on a 112" wheelbase. The frame has been boxed the entire length. The K-member has been reinforced with 2" x 4" steel tube & has a bolted-in transmission mount. To accommodate the independent front suspension, he crossmember has been modified to accept it. A rack & pinion steering rack has been installed as well. This Ford is equipped with an engine oil cooler and transmission cooler.

The engine and transmission undersides are excellent. The transmission is a stout TH400 3-speed automatic, uilt and fitted with a 3200 rpm stall converter specially selected to work with the supercharger. A transmission fluid cooler has also been utilized. All of this power is transmitted through a custom built driveshaft to a stout Ford 9-inch rear end built with 3.50:1 gearing and 31-spline axles. This is a Traction Lock differential with Castrol Hypo gear oil and Ford Friction Modifier added.

The front suspension features independent unequal A-arms with Coil-Over shocks. This is by Billy's Rod Shop-Symmons Custom Machine, anitoba, anada. The control arms are polished 6061-T6 aluminum with polished stainless steel adjusters and fasteners. The shocks are polished aluminum units by Aldan. The spring rate is 450 lbs / 10" length. The braking system utilized includes 11" front disc brakes and 11x2.25 rear drum brakes with Wilwood check valves, raided and stainless steel tubing & AN fittings. The pedal arm is by Pete & Jakes and the brake pedal pad is designed and machined by BB. The master cylinder is a dual feel Speedway Motors unit.

The wheels are by Centerline "Convo Pro" rims. The front wheels are sized at 15" x 4" with 1.75" backspacing. The tires are Vredestein Sprint Classic rubber, he fronts sized at 155 SR15 82 while the back tires are wrapped around 15" x 8 " wheels with B.F. Goodrich Radial T/As @ 255/70-SR15s.

This is a B&M Pro-Stick Automatic Shifter.

Open the doors to a classic street machine. The interior is done in a traditional tweed. The front seats are Mazda buckets (circa 1985) while the back seat is out of Mercury Lynx (circa 1987). The upholstery design is by "BB", inished in a GM velour with 2 shades of gray. Ronnie Kirkwood was responsible for the upholstery. The door panels are custom stitched and fitted with billet hardware. The doors have full window tracks and tinted glass.

The dash itself is by Downs Manufacturing, lso designed by BB. The underdash panel is hand made and fitted. The instrumentation is by Autometer. There are 2 5/8" gauges to monitor the oil pressure, ater temperature, oost, acuum, nd fuel level. There is a K&N fuel/air ratio gauge as well as custom toggle switch controls. The tachometer is a 3 3/8" Autometer unit while the speedometer is a 120 mph Autometer 3 3/8" gauge.

The air conditioning system features Vintage Air controls with all Earl's braided stainless steel hoses, N fittings & adapters. An Alpine AM/FM cassette stereo has been installed along with custom front & rear speakers. There are several custom touches to the interior.

Fly Low or Fly High, any of our photos of this BLOWN '34 Ford Tudor were taken at the Dallas Love Field Frontiers of Flight Museum, ocated only minutes from our showroom. Be sure to visit our friends at the Flight Museum if you find yourself in Dallas, exas. This is your opportunity to own a an exceptionally well done 1934 Ford Tudor street rod. Please read through our extensive text and play our video. Again, ou are welcomed and encouraged to contact Dave at 214-213-7072 or Maris at 214-616-2317 with any questions or concerns.

PHOTO SLIDESHOW BELOW

AUCTION TERMS AND CONDITIONS

ATTENTION TO NEW EBAY USERS/ 0 FEEDBACK USERS

If you have zero feedback or negative feedback, lease call us or email us before placing a bid, hank You.

SUCCESSFUL BIDDERS
The winning bidder must contact us within 24 hours to proceed with payment and delivery arrangements.
DEPOSIT
The winning bidder must submit a 20% non refundable deposit within 48 hours of the close of the auction to secure the vehicle unless other arrangements are made with us.
PAYMENT METHODS
Our preferred method of payment is bank wire transfer, r 3rd party financing. We can work with you if that is a problem. All funds must be in US dollars only. Please be sure to have full payment or approved financing in place before making your final bid. Feel free to call us with any questions.
PAYMENT OF BALANCE DUE
The buyer agrees to pay remaining balance due within 5 days of the close of the auction. All financial transactions must be completed before the vehicle leaves our dealership.
TAX, ITLE AND LICENSE
We are a licensed Texas dealership. It is required that we collect all tax, itle and license fees from Texas residents at the time of the sale. We will do all of the title work. Non Texas residents are responsible for paying taxes in his/her state. Overseas customers will be charged a $30.00 fee for wire transfers. We must collect a vehicle inventory tax of .002286% and a small documentary fee of $75.00 on ALL sales.
SHIPPING
The buyer is responsible for all shipping charges. We can refer you to a number of national and international shippers. Once the vehicle leaves our dealership, e will take no further responsibility for the vehicle.
ATTENTION BUYERS
This vehicle is being sold as is, here is, ith no warranty expressed, ritten or implied. The seller shall not be responsible for the correct description, uthenticity, enuine, r defects herein, nd makes no warranty in connection therewith. Although every effort is made on our part to accurately describe vehicle you, t is the buyers responsibility to see that his/her classic and collector car purchase meets their individual criteria. Any descriptions or representations are for identification purposes only and are not to be construed as a warranty of any type. The seller will make every effort to disclose any known defects associated with the vehicle at the buyers request prior to the close of the sale. Seller assumes no responsibility for any oral or written statements about the vehicle. A personal or 3rd party inspection prior to purchase is highly recommended.

I want to note that as a Texas dealership, e reserve the right to end this auction at any time should this vehicle sell on our showroom floor.

On Jul-03-15 at 11:55:44 PDT, eller added the following information:

ATTENTION : The Ford Model B would replace Ford's Model A in 1932. This is the model "B" or 40 series TUDOR sedan. Again, he body, owl, nd doors are HENRY FORD STEEL. Also, he brushed aluminum steering column is NOT a tilt unit. We apologize for the errors in the listing. The photos speak for themselves as well! Good luck in the auction. You can reach Dave at 214-213-7072 or Maris at 214-616-2317 with any questions or concerns. View our 100% positive customer feedback and bid with 100% confidence. : ATTENTION