1965 Ford Mustang Fastback A code GT
1965 Ford Mustang GT "A" Code for sale in Elkton, Maryland, United States
Condition: | Used |
Item location: | Elkton, Maryland, United States |
Make: | Ford |
Model: | Mustang |
SubModel: | GT "A" Code |
Type: | Fastback |
Trim: | Fastback 2+2 A code GT |
Year: | 1965 |
Mileage: | 107,000 |
VIN: | 5R09A229876 |
Color: | white |
Power options: | Air Conditioning |
Fuel: | Gasoline |
Transmission: | Manual - converted 5 speed |
Drive type: | RWD |
Interior color: | blue/white |
Vehicle Title: | Clear |
Want to buy? | Contact seller! |
Description for Ford Mustang 1965
For Sale
1965 Ford Mustang GT (authentic A code) — This car was built to be the "real deal" . It is a semi-modernized 65 Mustang that has the original muscle car ambiance of sound and looks (but safer and more reliable). Please thoroughly review the pictures and description as this car has had numerous updates and modifications and I want you to understand exactly what this car entails. It was built with the goal of reliability and the ability to safely cruise down a highway at 65mph in mind.
VIN - 5R09A229876
Mileage -
This is a very nice "A"code GT that has been slowly put together. It is in great shape, ut does need a few items to finish this project.
- The factory hood was not flat so I found another factory hood (but it still needs painted)
- The proportional valve needs adjusted as it is applying too much force to the rear brakes (didn't adjust after changing to dual bowl master cylinder)
- Has a vibration at ~40 mph from either a tire or driveshaft not properly balanced
- Needs carb properly tuned (has a brand new Edelbrock 1406 that needs some adjustment) — hesitates when giving a lot of gas
- AC compressor currently not bolted on the car (but I have it)
- Center console not screwed down (has a crack so I was looking for a replacement)
- Rear interior panels has speakers holes drilled into them
Work completed over the last year...
Pulled engine and cleaned it up with ceramic paint on block and lots of performance parts and powdercoating - (all of the parts added are brand NEW except for the PS pump which was remanufactured)
- Block .030"over
- Brand new AFR 165 non emission heads
- COMP Cams Pro Magnum Roller Rocker Arms 1831-16
- COMP Cams Push Rods 5/16 x 7.200"
- Edlebrock Carb - 600cfm with electric choke
- Edelbrock Performer RPM Street Fuel Pumps 1725
- Edelbrock 8102 - fuel line kit
- scott drake throttle linkage
- Edelbrock 7122 - Edelbrock Performer RPM Cam and Lifter Kits (.496/.520 - hydr flat tappet)
- Edelbrock water pump - black powdercoated
- Edlebrock Performer RPM Air-Gap Intake- black powdercoat
- Hedman ceramic headers (88406)
- Magnaflow 2.5" stainless steel exhaust with custom exhaust tips through valiance (tips weren't on yet in pic shown of rear)
- Petronix II ignition
- Pertonix II flamethrower coil
- remanufactured power steering pump and new pulley
- Open Letter Cobra Valve Covers for 289-302-351W_ (shelby style)
- Ansen 1.375" aluminum valve cover spacer
- shelby cobra style 289 air cleaner and filter
- Autolite 3924 Spark Plug x 8EA
- Many ARP bolts
- Brad Penn oil
- stant 180* thermostat
- Scott Drake Motor Mounts
Transmission was swapped from an automatic to a 5 speed transmission (brand new from Modern Driveline)
- T-5z, 3 and earlier, ord motorsport 2.95 w/ .63 od
- McLeod slik stik shifter 1" back
- t5 bell housing with block plate 87-93 ford mustang
- t5 cable style clutch fork
- clutch fork cover
- Clutch Cable kit 1965-66 Mustang
- 28oz 157 tooth flywheel billet steel
- clutch kit - Super King Cobra", 0.5" Organic
- shifter for t5 - stock appearance lever, oot, hrome ring, nd knob
- modern driveline crossmember for 1965-66 Mustang T-5
- speedometer gear
- clutch pedal assembly 65 mustang (original used unit that I powdercoated)
- 1965 FORD MUSTANG Prothane Transmission Mount 6-1605-BL
- Transmission Fluid, ynthetic, extron III/Mercon
Suspension / Steering
- Borgeson power steering upgrade kit
- front springs 600lb - 1" drop
- UCA drop (Shelby control arm relocate)
- Front end Aligned to
- 1. NO more than .25 degrees difference between driver's side and passenger's side.
- 2. +2.0 to +3.5 degrees caster.
- 3. -.5 to 0 degrees camber. No positive camber, lease. There is no problem having a slight variation from driver's side to passenger's side to account for the crown in the road.
- 4. 1/16" to 1/8"toe in
- 1" sway bar
- spring insulator top
- KYB shocks front and rear
- Proforged inner/outer driver side tie rod ends
- Proforged inner/outer passenger side tie rod ends
- Proforged tie rod ends sleeves driver / passenger side
- BFG radial TA 215-60-15 tires (25.16 diameter)
- American Racing torq thrust - Shelby R-model wheels 15x7 and
- trunk has plaid lining
Here is a list of items that I powdercoated/painted...
Timing chain cover | powder | gloss black |
Crank pulley | powder | gloss black |
2 Alternator bracket and a pulley | powder | gloss black |
Fan pulley | powder | gloss black |
AC bracket | powder | gloss black |
Power steering pump bracket | powder | gloss black |
2 Strut braces (~16x3"rect pieces) with eight bolts | powder | gloss black |
Transmission bell housing | powder | gloss black |
Rear engine block plate | powder | gloss black |
Fan shroud | powder | gloss black |
Clutch and brake pedal assembly | powder | gloss black |
Intake coolant and vacuum hose fittings (1 of each) | powder | gloss black |
Engine fan | powder | gloss black |
Emergency brake bracket assembly (3 small pieces) | powder | gloss black |
Master cylinder lid and hold down retainer | powder | gloss black |
Dip stick tube | powder | gloss black |
Hood hinges and springs | powder | gloss black |
Power steering pulley | powder | gloss black |
Driveshaft "U" bolts (small — 2 total) | powder | gloss black |
Radiator brackets | powder | gloss black |
Oil sending unit fitting | powder | gloss black |
Timing pointer | powder | gloss black |
Distributor hold down and bolt (small) | powder | gloss black |
Alternator bolt spacers (3 total) | powder | gloss black |
Coil bracket | powder | gloss black |
Driveshaft (u joints removed) | powder | gloss black |
Thermostat housing | powder | gloss black |
stock oil pan | powder | gloss black |
clutch cable plate (~8x8") | powder | gloss black |
clutch cable adapter (modern driveline) | powder | gloss black |
Engine block | Eastwood Ceramic Engine Paint - Universal Gloss Black | gloss black |
Master Cylinder and brake proportioning valve | Eastwood Master Cylinder Brake Gray Paint | gray |
engine bay and undercarriage of car | POR 15 top coat - chassis coat black | semi gloss black |
steering column | paint | Scott Drake AccuMatch Interior Paints - interior 64-66 mustang white (laquer) - L-5767 |
** I have the original heads, ntake, barrell carb, nd cam that I removed from this car. I am willing to provide for $500 additional dollars if the seller wants them.
Overall the paint appears to be in great shape (except for the replacement hood that needs painted). The driver side floor pan was replaced at some point in time (was done when I obtained the car 6 years ago). This is an original A code GT that was equipped with AC, S, nd deluxe pony interior.
If you have any questions — Please ask before bidding.
$2000 deposit must be received with 24 hours of the end of the auction and balance must be received before the car and title are handed over to the buyer.
Being sold "As Is"- this is a 50 year old car