1934 Ford rat rod coupe/roadster 1933 1934 1932 1936 [with title]

Description for Ford Other 1934

This is a rat rod. Lots of pieces mocked up. The chassis is a 59AB motor was out of a old 1940 fire truck. It was updated with this factory rebuilt 59AB. It has the 1939 transmission. It has 1934 pedals with a adapter under the frame. The floor was several decent pieces laid together. It still needs welded. The rear piece is partly patched. The left rear corner is the worst part of the floor. This thing runs and has new master cylinder and new brake lines and either new or rebuilt wheel cylinders. I run it on a gas bottle. The gas tank will need cleaned and checked for leak. I bought a new inner rear panel and stared making the outer out of old stuff. The frame has been patched in front of the left rear tire, 2 x 4 And A 6 X 12 piece on the side. The rest of the frame was very good metal.The 1/4 panes are being lengthened to roadster. It has the new steves upper roadster panel and it needs the upper piece that someone is cutting off of steve's roadster 1/4 's and is using on a coupe I have a friend doing it but later. The doors are coupe and shortened on the back. The cowl and front are still coupe. To make a roadster it still needs steve's Cowl top and sides. Then take around 1 inch off the front of the doors. this car is titled convertible. I'm still a Kansas dealer so Kansas residents pay me the sales tax. Other states pay in their home state. Sold with implied warranty only. To restore. Call Scott if interested. 816-506-3789 This is just pieced together and mocked up. It needs adjustments and welding. What you see is what you get. A 500.00 deposit is due within 48 hours and the balance within a week. I prefer wire transfer. The car can stay here a moth if needed but I may not be able to keep it inside that long. But I can use it and a gas bottle to load it. It is currently at my dealership in rural Hiawatha, ansas For winter storage. It has antifreeze in it. Iv'e straightened a low placek in the frame. I believe I have the upper roadster rear 1/4 panel pieces on the way off SAR's 1/4 panels. I have a SAR rumble lid that will go with it and a new under the trunk outer panel If you BUY IT NOW. Thanks again