1932 ford truck hot rat rod SCTA project

Description for Ford Other 1932

1932 Ford truck project

Great start to an original steel 32 truck with a 32 Fordtruck title and tons of quality work completed. Will take work to get on the road but there is a lot done here.

BODY

32 truck cab. Media blasted. New door skins and patch panels. New substructure and floor. Nice rot free windshied frame. 3.5" chop and 3" channel. 1933 dash. Door latches rebuilt.

Original 32 truck box that has been shortened up. New bulkhead and stake pockets. Nice original 32 tailgate with chrome hinge straps off an old hot rod.

1932 Ford grill shell and insert by vintique

guide 903-j headlights on modified stock bar.

Everything is in epoxy primer. No body work done.You know what you are getting here. It wasn't a cherry cab to start with but not the worst either. If a show truck is what you want I would replace the drip rails. They are available aftermarket.

CHASSIS

1932 Ford BB truck front frame rails with 2x3x3/16" tube from the firewall back. Very nice well build and designedchassis. Flat front crossmember and Model A rear crossmember. Tube tranny crossmember.

Front end is a 32 ford axle dropped 4". 1940 Ford spindles and brakes. Split bones. F-1 shock mounts and tube shocks. 32 Ford spring.

Rear end is a 1939 banjo rear. 3.78 ratio. Its held in place with a new triangulated 4-link. Tube shocks and New high arch model A style leaf spring. Will need open drive conversion.

DRIVETRAIN

TBI 305 and turbo 350 trans. Used for mockup. Might run but condition is unknown and should be considered cores. The 6x2 intake and edlebrock valve covers are not included.

1940 Ford steering wheel. 1932 column tube and drop. 1940 ford steering box. Very nice traditionalside steering setup.

WHAT IT NEEDS

The brakes will need rebuild. Shoe and wheel cyl cores are included. Brake pedal assembly and lines(I was thinking Ansen type firewall mount.As of now the firewall is still removable. I didn't finish the trans tunnel or toe boards on the floor. I will leave that up to you once you decide if you want to make the firewall fixed or not. It is pictures with two different sets of wheels and tires. The solid black wheels and blackwalls are not included they are off my coupe. Just used to show the look with 40 Ford wheels. The 1935 wire wheels with white walls are available for $500 extra. Super nice wires with 4.50x16 fronts and 6.50x16 rear bias ply whitewalls. Car will be sold with a set of roller 15" steel wheels with g-78 tires.

Again the 6x2 intake and valve covers are not included. Sold with roller wheels and tires.

$1000 deposit due via paypal within 24 hours

Will assist with loading for shipping

Remember this is a project sold as is. Feel free to come inspect or request more pictures.

Call me with questions 920-819-8086 ROB

AND NO TRADES!!!!!!