1931 Ford Model A Tudor Sedan "The Eff'n A"

Description for Ford Model A 1931

For Sale is my 1931 Ford Model A Tudor Sedan. Car has seen some track time at Byron Dragway, Cordova Dragway, and Great Lakes Dragway. The build of the car was to be reminiscent of the 1960’s drag race era. This car meets all criteria for the Midwest Nostalgia races that I have attended, Meltdown Drags, Run Whatcha Brung Drags, and Hunnert Car Heads Up. Has run a best of 12.69 @ 103mph. Car drives very well, tracks perfect, no bump steer, etc. Clear Missouri Title Please note that chassis pictures are from the initial build and that there is signs of this car being driven. It is not to be implied that this is in any way a trailer queen.

This displacement hemi was only offered for 2 model years, so is definitely one of the rarer of the early Hemis. Below is a list of all the main items in the engine, transmission, rear differential, brakes, wheels & tires, and main, misc. components:

325 Dodge Hemi Rebuild Description:

Machine Work:

- Bored the Cylinders (0.060 over stock)

- Block Decked & Align Honed

- All Parts Hot Tanked & Magnafluxed

- Stock Crank ground (0.020 under stock)

- Stock Connecting rods Reconditioned & Shot Peened

- Rotating assembly (Crank, Rods, Pistons & Pins) Balanced

- 241 Dodge Cylinder Heads Resurfaced

- Valve Job to Accept Larger Valves

- New Valve guides & Hardened Seats installed

- Cylinder Heads Ported for Optimum Flow

- Valve Heads Ground to Size

- New Cam Bearings Installed

Internal Parts Utilized:

- Original KD500 325 Block

- 241 Dodge Cylinder Heads

- New Cast Flat Top Pistons & Moly Rings – 0.060 oversize

- New Comp Intake Valves Part No. I2495-1 – Olds 350 – 1.875”

- New Comp Exhaust Valves Part No. E2496-1 – Olds 350 – 1.564”

- New Valves Springs

- New Valve Locks & Seals – Part No. 506-16

- New Main Bearings – MS-1719P20

- New Rod Bearings – CB-482P20

- New Cam Bearings – DUR PD-10

- New Rod Bolts - 21701

- Camshaft Reground by Iskedarian - .485” Lift / 270° Duration

- New Lifters – 91711

- New Brass Freeze Plugs

Parts Purchased From Hot HemI Heads Website:

- Modified 340 Hi-volume Oil Pump - 21960

- Aluminum Vertical Oil Filter Adapter - 20101

- Oil Bypass Plug – 20120

- Adjustable Custom Chrome Moly Push Rods – 21087.325

- True Roller Timing Set – 21000

- Aluminum Lower Alternator Bracket – 20510

- Aluminum Tall Finned Valve Covers – 21514

- Small Block Mopar Distributor Adapter – 27014

- Small Block Chevy Water Pump Adapter – 20720

- Water Cross Over & Thermostat Housing – 21304T

- Chevy Automatic Transmission Adapter with Driver’s Side Starter Mount – 26000

- Cast Aluminum Timing Cover – 20215

- Intermediate Shaft Bushing – 21950

- Cam Washer & Screw – 20304

- Modified Oil Slinger – 29192

Induction Parts Utilized:

- Offenhauser 4x2 Aluminum Intake Manifold

- Custom machine work to Manifold to open inlet ports

- Matched Pair of New Holley 390 CFM carburetors

- Eelco Finned Aluminum Valley Cover Under Intake

- Hilborn Style Dual Quad Finned Intake Scoop

- Pair of Small K&N Air Filters Inside Scoop

- Holley Fuel Pressure Regulator

- Holley Red Electric Fuel Pump

Misc. Engine Components:

- High Torque Mini Starter

- GM Style Chrome 100 Amp Alternator

- Small Block Chevy Aluminum High Volume Water Pump

1966 GM Powerglide Transmission Rebuild Description:

Rebuild Work:

- Case disassembled, cleaned, and manual shift valve body cleaned & inspected

Internal Parts Utilized:

- Heavy duty clutch bands used

- High Pressure main pump

- B&M Shift Arm

Torque Converter:

- TCI High Performance 2,800 RPM stall converter

External Parts Utilized:

- 18” Finned Aluminum transmission cooler

- 3/8” Hydraulic high pressure cooler lines

- B&M Pro Ratchet Shifter

- B&M shifter cable

- 3-1/2” steel driveshaft with Spicer 1350 U-joints

8.75 Mopar Rear Differntial Assembly:

- Stock 8.75 Mopar differential case

- 489 Third Member with Yukon Gear 3.55:1 ring & pinion with Mopar Sure-Grip Positraction

- 8.75 Mopar Green Bearings

- All new brake shoes, hardware, & turned drums

Brake Components:

- Dual Reservoir GM Style Disc/Drum master cylinder mounted under the floor

- All steel brake lines

- Disc/Drum Residual Brake Pressure Check Valves

- Front and Rear D.O.T. stainless steel braided brake hoses

- GM Metric front disc brake kit

- Adjustable Brake Proportioning Valve

Wheels & Tires:

- Rear 15”x8” Wheel Vintiques Steel Smoothie style wheels

- Front JD Wheel 15”x4.5” Halibrand Style Replica polished aluminum wheels

- Rear Tires are 10.00-15 Firestone Dragster D.O.T. cheater slicks with Wide White Wall

- Front Tires are Coker Classic 165/75R15 Wide White Wall radial tires

Chassis Components:

- Stock Model A frame rails boxed with 3/16” plate

- Custom “X” member constructed of 3/16” plate

- Front 1-1/2” Dropped Cross Member

- Front Reverse Eye Axle Spring

- Front Superbell 4” Drop I-Beam axle

- New fitted king pins & spindles

- Split stock wishbones up front

- Stock Rear buggy spring with several leaves removed

- 24” ladder bars

- Front and Rear gas charged Gabriel Shocks

- Steering pivots are all Heim Joints with DOM tubing

Miscellaneous Parts:

- Tig welded Aluminum radiator

- 16” electric fan with 160°F off / 185°F on thermostat

- 10”x30” 10 gallon Spun Aluminum Gas Tank

- Holley aluminum housing inline 100 Micron Fuel Filter (Pre-Pump)

- Big End Performance aluminum housing inline 40 Micron Fuel Filter (Post- Pump)

- Mooneyes 8,000 RPM Tachometer

- Sun 100 PSI Oil Pressure Gauge & Water Temperature Gauge

- 15 PSI Fuel Pressure gauge

- Aluminum Mopar Manual Steering Box

- Quick Release hub on Gold Flake steering wheel

- 1958 Chevrolet Bel Air Taillight Housings with new lenses & sockets