1967 Mustang Fastback 2nd Owner 23 yrs 5.0/AOD No Reserve Lots Extra Parts 1968
1967 Ford Mustang for sale in Lynnwood, Washington, United States
Condition: | Used |
Item location: | Lynnwood, Washington, United States |
Make: | Ford |
Model: | Mustang |
Year: | 1967 |
Mileage: | 147,000 |
VIN: | 7R02C1610XX |
Vehicle Title: | Clear |
Want to buy? | Contact seller! |
Description for Ford Mustang 1967
I am the second owner of this fastback, owned and driven this car 23 years, always slept in garage, modified a bit, never professionally restored but she has solid mostly original metal (replaced hood and rear valance) with a known 50 year history. Great daily/weekly driver but I won't be able to take care of her properly any longer.
Loads of extras from 30+ years available with car for resale or restoration.
Have stack of paperwork including original bill of sale.
Daily/weekly driver, mild restomod, but could restore back to stock.
Was factory Lime Gold, C Code 289/C4; repainted Lime Gold, 5.0/AOD
147,000 miles on car (about 3000 on crate motor)
Fiberglass Shelby-style hood, dual exhaust valance added when painted; all other body panels sheet metal original factory
Small paint bubbles on lower door and rear window edge
No major body damage or rust in its lifetime
Solid original floor pans and frame rails
Repainted once in '05 - bare metal, original color, added hood & stripes at that time
Originally A/C equipped car – compressor gone, but parts on/behind firewall mostly intact (vents, hoses, heater box)
5.0L 302 Ford Racing M-6007-XE3M Crate Motor
“-340 HP / 310 ft/lbs -9.0:1 Compression -E303 Roller Cam -X303 GT-40 Heads”(These stats based on Ford sales info)
MSD ignition coil, -6A ignition control box, distributor
Edelbrock 1405 4V carburetor (have Autolite 4100 1.12 4V in “extras”)
Edelbrock Performer RPM manifold
Crate motor put in about 9 years ago but less than 3000 miles on engine
AOD transmission – Stall converter & miles unknown, fox body, same time as crate motor
Single exhaust, stock manifolds, stock 2.79 rear end – not optimal for crate motor but never did upgrade
Converted to Four wheel power disc brakes
Four piston disc front/Stainless Steel Brakes Corporation SVO Mustang rear
Rack and Pinion Steering & Tilt column -Flaming River, Grant Steering Wheel
(Have most stock power steering components for stock restoration – see Extras)
Replaced all front control arms, suspension and bushings, added following:
Larger Sway Bar
Negative Wedge Camber Kit
Upper Control Arm/Shelby/Arning Drop w/reinforcement plate
Street-or-Track Adjustable Strut Rods
Opentracker Roller Spring Perches
Progressive Rate Spring Coils
Edelbrock Front Shocks (New in box Edelbrock Rear Shocks in Extras)
Export Brace
Sequential LED Tail Lights
Pop-Open Gas Cap (with internal safety cap)
15 inch Styled Steel Wheels
New carpet, TMI Sport seat upholstery & foam, headliner
Dash pad needs replacing but I have a new one with extras (see Extras)
Instrument panel and door panels need restoration
Original console in good shape
Non-fold down seat and non-trap door with speakers installed, but full fold down seat and uncut functional trap door included in “Extras”
Aftermarket temperature gauge inside console, but original works fine.
Cons-
These are functional issues of interest to all, not related to “stock vs modified” – some see original rear end as con, some want stock, etc.
-Rust bubble in the usual Mustang front door corners, and rust bubble on edge of rear window -Some small chips and scratches in paint from daily use (last painted in '05)
-Fuel tank sending unit float doesn't float, so gauge reads empty, but gauge tested okay. (I have been using mileage to keep track of fuel use)
-Small coolant leak around thermostat, need to reinstall/replace gasket
-Reverse light wire cable between AOD transmission and car needs resplicing/replacing (combines AOD plug with stock car wire to tell reverse lights trans is in R)
-Needs fan shroud, no overheating issues but exposed fan blades
-Horn is not wired to Grant steering wheel
-Overall interior needs refreshing; Has new seats/carpet/headliner but panels, instrument panel, etc could use fresh dyeing/painting
-Rubber seat plugs in floorpans missing but only recently removed to redo seat upholstery
-Oily surface on floorpan pics is transmission fluid from hose leak that was replaced. Seattle weather has kept me from cleaning the floorpan properly and replacing the rubber seat plugs
EXTRAS – See pics for details
These are free with the car but I will not ship separately. If your shipping or pick up plan allows items in car, or you show up with a truck, I will include these, but I can't box up and ship these parts.
Fold down rear seat (3 main pieces, chrome, shims), new fold down carpet
Functional trunk trap door for fold down seat option
New dashpad
3 point seat belts and installation kit
Most stock power steering components: new pump, cylinder, control arm, hoses & original center link and cylinder
Stock steering box, shaft and column
Second set of old four piston brake calipers for core trade in or rebuild
Monte Carlo bar
Car cover
Jack stands and wheel dollies
Autolite 4100 1.12 venturi 4 barrel carb
Second power brake booster for core or rebuild
K&N Air Filter, round and top cover
Timing Light & tachometer
Interior dye and paint if shipping allows
Can with paint from '05 repaint for touch-up or matching
Folder of paperwork including original bill of sale
Stack of manuals for maintenance, repair, restoration
Boxes of 30+ years of loose Mustang screws, bolts, etc.
This is a 50 year old car, a daily/weekly driver, a '10 footer', being sold “as-is”. Available for inspection, please do so before you bid. I'd be glad to answer any questions but what you see is what you get.
Located just north of Seattle WA. Open to US & international buyers, but you have to sort out shipping from my driveway to yours. Again, if your shipping allows loose items, I will include all the additional items listed as “extras” in car, or help load them into a truck, but will not ship extra items separately.
$500 Paypal deposit due within 24 hours. Remainder of payment due within 72 hours via wire transfer. Please feel free to contact me for questions, email, text or call 808-286-0421.
Please cut and paste for more pics -https://photos.google.com/share/AF1QipNfh3M1nXvPNKGlWnqORyIiKEbR_idW8UuSJXYYrCWjyrJAfzAoJM24iTRLHrKhRw?key=QkZXc2xtUFVNSXRuYUEtVzJ5S3gtMDhTT2lreDRB
Mustang motor - YouTube
Video will open in a new window
[isdntekvideo]