1971 GMC 1500 Long Bed Pickup
1971 GMC Sierra 1500 for sale in Leander, Texas, United States
Condition: |
Used |
Item location: |
Leander, Texas, United States |
Make: |
GMC |
Model: |
Sierra 1500 |
Year: |
1971 |
Mileage: |
5,000 |
VIN: |
CE134-S110817 |
Color: |
Black |
Engine size: |
350 |
Number of cylinders: |
8 |
Power options: |
Air Conditioning, Power Windows |
Fuel: |
Gasoline |
Transmission: |
Automatic |
Drive type: |
RWD |
Interior color: |
Gray |
Vehicle Title: |
Clear |
Want to buy? |
Contact seller!
|
Description for GMC Sierra 1500 1971
Selling my old truck. I've owned it for 18 years. I did a frame off restoration. It's still in great shape mechanically, but could use some cosmetic TLC. It has lots of little scratches and dings. The bed is unpainted because I always intended to get a bed liner. It has just a few thousand miles on it since the restoration.
- The engine is a 350 that has been completely rebuilt:
- The block was cleaned, magna fluxed, with new cam bearings installed.
- The cylinders were bored out .030" with new flat top pistons and rings.
- It has a 350 HP 327 L79 cam, with 221 duration and .447 lift. New lifters and a double roller timing chain were installed
- The heads were cleaned, magna fluxed, and reworked with new Z28 valve springs.
- The crankshaft was turned .010 /.010 with new main and rod bearings.
- New oil pump, water pump, fuel pump, and reman alternator and starter.
- The ignition has been upgraded to HEI, with new Accell wires and plugs.
- It has a new Edelbrock performer intake manifold and Performer 1406 carburetor.
- It has new Flowtech headers on the exhaust.
- The transmission is a 700R4 overdrive that was completely rebuilt with heavy duty clutches and bands, a new torque converter, and corvette servos installed.
- The driveshaft was shortened and balanced with new U joints and carrier bearing installed.
- The front suspension has been rebuilt with new ball joints, control arm bushings, pitman arm, idler arm, tie rod ends, and sway bar bushings.
- The frame was sand blasted and painted with epoxy rust preventive chassis coating.
- The rear end was cleaned, inspected, the lube changed, and new axle seals installed.
- It has all new cab support and radiator core support rubber mounts installed.
- The brake system has been completely rebuilt with a new master cylinder, wheel cylinders, shoes, pads, and rear drums. The rotors were machined, calipers rebuilt, and all new rubber brake hoses installed.
- It has a new blazer fuel tank kit installed in the rear and new steel fuel lines.
- It has a new radiator, and all new cooling system hoses.
- It has a tilt steering column that has been rebuilt, and the power steering box has been resealed.
- The rear end was rebuilt with new bearings and 3.73 ratio gears.
- The A/C system was also rebuilt. New hoses, compressor, condenser, etc.
Other classic cars for sale