1951 Jaguar XK120 Open Two Seater (Roadster) Rolling Chassis With Title

Description for Jaguar XK 1951

Veyron Template 1951 Jaguar XK120 Rolling Chassis - Left Hand Drive - Open Two Seater (Roadster) - With Clear Title

Jaguar XK120 Open Two Seater (Roadster) Rolling Chassis - A Rarely Seen Opportunity - Useful As A Replacement Chassis Or Construction Of a Jaguar Special - Clear New York Transferable Registration (Title)

Details Year 1951 Make Jaguar XK120 Rolling Chassis - Model Left Hand Drive - Open Two Seater (Roadster) - With Clear Title Odometer unknown VIN 671355 Engine Originally Supplied: 3.4 Litre Six Cylinder Transmission Manual Paint Originally As Applied: Birch Grey Interior Originally As Supplied: Biscuit w/ Red Trim Condition Report Body Needs Work Paint Needs Work Interior Needs Work Carpets Dirty/Needs work Engine Needs Work Transmission Needs Work Suspension Good Steering Needs Work Brakes Needs Work Wheels Good Tires Needs Replacement About the Seller

Located near Detroit, ichigan, he Seven Gables Motor Garage Ltd offers vintage British motor-car spares and the occasional classic vehicle. We have shipped vintage spares across the globe and offer unsurpassed client care in doing so. At the upper right, aken in 1968, s the owner Gary, t the tender age of 15, n top of the world in his first car: an XK140 DHC bought for $100. Because he was too young to drive it he posed for a lot of pictures in his parent's driveway!

, Email Contact: Gary@TheSevenGablesMotorGarage.com 248-594-5905 Gary Seraphinoff Overview

A FEW WORDS ABOUT THE SEVEN GABLES MOTOR GARAGE LTD

Although operated on a small scale by the owner Gary Seraphinoff, he Seven Gables Motor Garage Ltd located in the Detroit, ichigan USA suburb of Bloomfield Hills has a very large amount of vintage British motoring enthusiasm. Passionate for over a half century, ary carries a fair amount of experience in dealing with these motor-cars. Being a hobby as much as it is a small business, e sell vintage vehicles and the spares for these classics. In addition to having a small collection of British motor-cars with the focus being Jaguar XK120's as well as his wife Kathy's, omeday to be on the road again, G-TD. Located at "Seven Gables", he family home, ary has sold vintage spares around the globe and offers unsurpassed care doing it. We can be reached by telephone at 248.594.5906. or by email at Gary@TheSevenGablesMotorGarage.com

1951 LEFT HAND DRIVE XK120 OPEN TWO SEATER (ROADSTER) ROLLING CHASSIS - #671355 XK120 PURCHASED ORIGINALLY AT "RM OVERSEAS", USSELDORF, ERMANY - LIKELY PURCHASED BY A USA SERVICEMAN AND SUBSEQUENTLY BROUGHT TO USA - EARLY RACE HISTORY IN 1950'S - MOVED TO REPAIR SHOP IN LATE 1950'S WHERE BODY WAS SEPARATED FROM CHASSIS AND THEREAFTER FORGOTTEN.

Never before offered to anyone since the late 1950's having sat forgotten on a farm in rural New York, his chassis presents several different ways to be utilized by the Jaguar XK enthusiast: It will be suitable for someone who has need of a replacement chassis. However, ecause it has the extremely rare attribute of having a clear title it therefore would be ideally suited as the basis for a Jaguar XK120 OTS re-body or perhaps a Jaguar "Special". A certain amount of the value of this chassis is indeed having the title and, s out of the country purchasers know, ay prove useful for easy importation into their country. Replacement XK120 chassis are being made today, ut the original identities of XK120's along with their titles are not. This chassis even has a Jaguar Heritage Certificate showing the original specifications of the XK120 as it came with from Coventry.

The previous owner had the XK120 many, any years and was then acquired by my colleague. The chassis has been separated from the rest of the XK120. The previous owner said that the XK was raced in competition early in the 1950's and in fact my colleague has the original two doors on display with the racing numbers still on them.

A Review Of The Condition Of Chassis #671355

My colleague that owns this chassis is an extremely capable craftsman. He is no stranger to this type of work having a fully equipped shop with MIG, IG and arc welding equipment and every sort of automotive related machine in between. As a state policeman he looks forward to retirement when he can pursue his passion for automobile restoration as a full time business. This chassis was rusted in some places as they often are. Being a resourceful man, e found it best to combine two chassis to create one good one. The rear was better on one and the front better on another. The 1951 front section (where the chassis number is visibly stamped) has the engine mounts for the early (up to 1952) XK120 engine. If you wish, e can supply you with the later type engine brackets. The rear section has mounting for the later style SL gear box mounting as that section came from a 1954 XK120.

Armed with a copy of the original factory XK120 chassis blueprint and a mint condition and original XK120 chassis beside him, e refurbished the chassis for #671355 as described below.

You will see in the images below how first the entire chassis was media blasted inside and out. Because the rusted areas were opened up by him prior to the media blasting, e was able to remove the rust from the interior as well. That was a rare opportunity that turned the "lemons" of cut out rust openings into the "lemonade" of being able to access the interior of the chassis box sections because of it!

All the rusted metal sections was superbly replaced by butt welding (in the same 12 gauge thickness as the factory) exact size pieces in each cut out aperture. Also, he quality of the welding was further enhanced by applying "fish plated" overlapping sections over each weld seam. That is something that not everyone would do. All of the corners that had repairs done to them have the same radius as the factory originals. The welds were then ground smooth and skim coated with metal infused filler to make a perfect, nvisible join. By the way, y colleague said that the interior of the box sections did not indicate rusting from the inside out. Perhaps most importantly, his chassis is exactly within factory measurements from front to rear within 1/8" of an inch in all places.

The entire chassis and its various components were then painted with "rust encapsulating" red oxide primer. That was filled by a coat of gloss black chassis black paint. The chassis could be taken to the next level by wet sanding the paint and filling the surface pits that still exist, tc. It is of course perfectly usable as is.

All the scarce brake hardware (e.g. just try and find a set of the rear self adjusting mechanisms) appear to be on the brake assemblies. The emergency brake assembly is off the chassis but included. The rear end assembly seems fine and rotates. Of course the chassis has no steering gearbox and column but it does have the idler box on the other side. The tires are truck tires temporarily put on the 5.5" rims to enable it to roll.

Please note: the remaining chassis components this chassis needs (XK120 engine, earbox, teering gearbox etc) while not original to this XK120 are available at extra cost if desired.

Located as it is in the state of New York, t is close to the shipping ports should it be required to ship overseas. Hopefully this will have an exciting future use to you and good luck bidding!

Terms of Sale

The Deposit:
Please be ready to place a $1,000 Paypal deposit within 48 hours of auction's close. All transactions must be completed within 7 days of the end of auction.

Tax, itle and License:
The buyer is responsible for applicable tax, itle and licensing fees in your area.

Note: If the deposit is not received within forty-eight hours (2 business days) or if the sale is not complete within 7 days of the close of the auction, e reserve the right to sell to another qualified buyer.

Legally Binding Contract:
If you are the winning bidder of this auction please follow through with the transaction. Remember, our winning bid is a legally binding contract to purchase.

Condition Disclaimer

Seller reserves the right to end this listing at anytime should the vehicle no longer be available for sale. Pre-purchase inspections are welcome but must be made before the auction ends. Please ask any questions before bidding. We have described the above mentioned vehicle to the best of our ability.

This rolling chassis is sold in "AS IS" condition.

All sales are final with no returns

We reserve the right to end the auction at any time.

Transportation

We will happily assist with worldwide transportation at the buyer's expense..

Gallery Please view the remaining images below... Premium Template copyright 2014 hdauctions.com