1989 Jeep Grand Wagoneer LS swap 6 speed automatic 4X4 project 1200 mile pwrtrn

Description for Jeep Wagoneer 1989

1989 Jeep grand Wagoneer project. CLASSIC LOOKS WITH MODERN TECHNOLOGYThis is a project. non running. The powertrain is sitting in the vehicle but not bolted up. LC9 engine all aluminum with six speed automatic and transfer case. Powertrain from 2012 pick up with 1200 miles only. Novak Engine mounts. Speed scene wiring harness. The interior is like brand new see pictures. The roof rack. bumpers. grill etc have been removed and are in vehicle. Comes with additional driver fender see picture of the dent. THIS IS NOT A 1 DAY PROJECT - DO NOT BID IF YOU DON'T HAVE THE MEANS TO COMPLETE. Ask any questions. The engine/trans/transfer case + wiring harness + motor mounts alone were over $6KThe wiring harness is in the box. This jeep was running / driving prior to beginning project. The pros of this Jeep are the interior is pretty much immaculate and the aluminum engine/trans/transfer case setup took lots of weight off of the Jeep and provide twice the gears that the factory 3 speed did along with fuel injected power. The cons are that there is still a fair amount of work to get this done but when it's done you'll have a nice vehicle with classic looks but modern driveability. A straight front left fender comes with the jeep bc the one on the Jeep has a crease. It also has a surface rust spot on the left rear of the vehicle about 2 inches in diameter. You will need at minimum:connect engine. transmission. wiring. cooling system. driveshafts. Put front bumper. grill. etc back on (removed for engine install). Still needed to purchase: Exhaust. radiator. driveshafts.