V8 1985 Land Rover Defender 110
1985 Land Rover Defender Orginal for sale in Rye, United Kingdom
Item location: | Rye, United Kingdom |
Make: | Land Rover |
Model: | Defender |
SubModel: | V8 110 |
Trim: | Orginal |
Year: | 1985 |
Mileage: | 156,345 |
VIN: | 00000000000000000 |
Color: | grey |
Engine size: | 3.9 V8 |
Fuel: | Diesel |
Transmission: | Manual |
Drive type: | 4WD |
Interior color: | Brown |
Drive side: | Right-hand drive |
Options: | 4-Wheel Drive |
Vehicle Title: | Clear |
Want to buy? | Contact seller! |
Description for Land Rover Defender 1985
Very original county station wagon. Ideal for classic car collector.
Like many classic Land Rovers the chassis was starting to show its age so we have carried out a frame off restoration on this Defender and then left the original body work and interior intact.
Even thoughit would have been far easier and cheaper to replace the chassis with a galvanised chassis we decided not to as it is a matching chassis/Vin number/ original enginevehicle.
It has had uprated LRI and Bilstein suspension set up along with a rear suspension anti roll/ sway bar to make create a far superior driving experience along with a full stainless steel exhaust system. These changes are reversible should a purist prefer to change it back to factory original.
Work carried out:
-Remove body from chassis for chassis work / refitting of body after chassis work
-Shot blast chassis, radius arms, axles and chassis mounting brackets
- Repair chassis corrosion, including replacement:- Rear spring mounts, bulkhead out riggers, bump stop mountings, Rear Anti roll bar mounts, station wagon body crossmember and repair sections of main chassis rails and body brackets
-Etch prime and paint chassis in satin black 2k top coat
-Etch prime and paint Axles, radius arms and suspension brackets
-Remove suspension bushes and refit with supplied super-pro bushes
-Strip clean / paint swivel housing and clean and paint rear brakes
-Adjust Swivel bearings. Replace front brake discs, pads & callipers. Replace rear brake shoes & brake cylinders.
-Replaced all suspension and all body mounting bolts and some chassis
-Replace engine camshaft using 3.9 camshaft, new followers, timing chain & sprockets.
-Repair to front to rear wiring harness
-Replace Faulty Head Light Switch
-Replace exhaust system with Double S stainless system including tubular manifolds
-Replaced 1x track rod end 1x drag link end and drop arm boot.
-Replace faulty alternator
-Replace Battery
*We have been informed that the previous keeper recently had the gear box rebuilt but we do not have paper work to support this.
Parts Fitted *More parts may have been fitted than shown on list below as so much work as been carried out.
ALTERNATOR - V8 45 AMP
VOLTMETER - DEFENDER
BRAKE CALIPER - 110 FRONT RH >HA
BRAKE CALIPER - 110 FRONT LH >HA
BRAKE PADS - 110 >HA
BRAKE DISC - 110 NON VENTED
BRAKE CYLINDER - 110 REAR RH
RTC3168 LH OEM
BRAKE SHOES - 110 REAR OEM
BATTERY - VARTA E24
EXHAUST SYSTEM - 110 V8 STAINLESS PERFORMANCE
SPARK PLUG - V8
ROCKER COVER GASKET - V8
THERMOSTAT - V8
VALLEY GASKET & SEALS
WATER PUMP GASKET
FRONT COVER GASKET
SEAL - V8 CRANKSHAFT FRONT OEM
OIL FILTER - V8/TDI OEM
CRANKSHAFT SPROCKET
CAMSHAFT SPROCKET - V8
TIMING CHAIN - V8
CAMSHAFT - 3.9 EFI
SWITCH - BRAKE PRESSURE VALVE
HOSE - WATER PUMP TO HEATER OUTLET
HOSE - WATER PUMP TO HEATER INLET
PAS BELT - V8
LIGHT SWITCH
TRACK ROD END - RHT
FUEL PUMP RUBBER MOUNT
BUMP STOP - REAR
BRAKE PIPES & FITTINGS
BRAKE FLEXI HOSE SET FRONT & REAR
FULCRUM BRACKET INC A FRAME BALL JOINT OEM
ANTI ROLL BAR LINK
TURRET MOUNTING RINGS - PAIR
SHOCK ABSORBER TURRET
BODY CROSSMEMBER - STATION WAGON - GALVANISED
ANTI ROLL BAR CAHSSIS BRACKET
BUMP STOP CHASSIS MOUNT
SPRING MOUNT - 110
BULKHEAD OUTRIGGER RH
BULKHEAD OUTRIGGER LH
FRONT + REAR 110 UPGRADED 1" LOWERING SPRINGS
H. DUTY REAR ANTI SWAY BAR
SUPERPRO SWAY BAR CLAMPS + BUSHES
SUPERPRO BUSH KIT
On site AA or RAC inspections are welcome