1965 PORSCHE 356 C Coupe **PROJECT** A Lot already finished!!!!!

Description for Porsche 356 1965

************************************Based on a bunch of questions I've been getting I added some more pictures to the same link below:Inside Floor Pan, Under the Dash, Inside Rear section behind the rear seat, Inside both doors, Inside the front trunkwith the gas tank in there. Inside Battery area.
I want you to see everything exactly as it is, so keep asking for pictures I will add ASAP..
The heat Flap boxes are pictured, The heat channels in the rockers was done by the previous owner I will test themand let you know.. And I believe the heat control boxes are missing.. I am looking for them now...************************************1st::***MORE PICTURES*** Yellow Car pictured is so you can see what it can looks like!!!!Everybody likes lots of detailed pictures including the COA, Please Cut & Paste the following URL:https://www.facebook.com/pg/My-porsche-2250825805247092/photos/?tab=album&album_id=2447152378947766
VIDEO of the engine running can be found here:https://www.facebook.com/2250825805247092/videos/556158491890816/?modal=admin_todo_tour
What we have here is a stalled PROJECT!! This is a #'s Matching 356 C Coupe...
A lot of work already done by the previous owner who couldn't finish it, then I finished a little moreand bought a lot of new parts to complete it but unfortunately I have to sell it also..
What is done and need to be done:
New Metal welded in, new floor pans and longitude.The underside, front trunk, and engine bay were all sand blasted down to bare metal, metalprep, 2 coats of POR15 and 2 coats of Wurth Stonegard Undercoating.Most of the body work is done, detailed long board sanding needs to be complete to get it real nice.
Notes from the previous owner: Engine was rebuilt with:-An SC Crank was installed with Standard bearing onall the mains.-Standard bearings on the Connecting Rods.-Mahle Pistons and Cylinders, 82.5 (1600cc). Not New.-Sheet metal was re-finished and replaced,-When I got the carthe engine was out and Carburetors came in a box needing to be rebuilt, I had them rebuilt here.-Windshield and rear window are in good shape with good rubber.-Seats were newly covered as seen in pictures.
Then I put the engine back in the car to test run it for this sale.. 6 different test starts and runs from 15-30 minutes each,appears to be running very well, See link to engine running..
Wheels do need to be re-Chromed.Bumpers as seen in the pictures but there are no Chrome Bumperette's
I am only looking to get what I have invested in materials, nothing for my labor which is a lot of time believe me!!!!If you have been looking at this market you know what it can be worth and all the hard work is already done.Heck, do an eBay search for a 356 engine's it worth $10K+ by itself...
I will be checking my email regularly, Please ask questions, and I will post reply's. If you want any more specificpictures let me know.. I want to make sure you are happy with your purchase..
Please Note: The engine runs but the car is not drivable. Shipping will need to be winched on.Clear Title in my name.
-BillShipping is totally on the buyer, I can bring the car somewhere for easy loading..*****$500 Deposit after auction, we can discuss final payment.*****