1969 Chevy c10 full Custom (BattleShip)

Description for Chevrolet C-10 1969

This is a 1969 Chevy C10 short wid, AKA Battleshi, that has been fully restored with a 1968 Chevy front clip.
Lets start out with the build. The truck and all parts used have been acid dipped, the frame was sand blasted.
we started off with the cab. we cut out all the rust and repaired any thing that was wrong. the cab was set on the frame all body panels were lined up. and body gaps was cut and tig welded, for a nice gap, we smoothed the fire wall, installed Kindig door handles, install porter built hood hinges, customs built marker lights, the in side of the bed was custom built. all the body work was done with lead, and skimmed with small amounts of fill was used from there. the body was then premiered and blocked out with 120 and then taken down again seam sealed and primed and blocked out with 400, under the cab has been color matched bed lined along with the in side the fenders and bed. the inside of the truck was painted and flat cleared, the out side of the truck was then painted same color and cleared with 3 coats of ppg. the body was then wet sanded and cleared again.
After the frame was sandblasted we install a full Porter Built front cross member with porter built arms, and a full Porter built Rear kit. the frame was then powder coated and we installed a ls3 with a lite cam and a 6l90, Boyd welding efi tank full air ride.
the motor is a ls3 the has had a small cam installed, the block was paint to match the truck, we installed a Holley mid rise intak, Holley injectors, our custom valve covers, wegner motorsports pulley set up, Holley oil pan, custom built stainless headers and flow masters,
The gm 6l90 as been fully built.
the bed wood is birds eye maple that has been custom stained and flat cleared
The wiring: the motor and trans harness is built from speartech lsx the chassis harness is painless
It has vintage air
it has a custom built ididit tilt column
gauge are Dakota digital HDX
the seats and door panels are custom built with custom died leather
all the trim is from Mar-K
the wheel where custom made and painted to match the truck
all the lights are led, the head light are led,
The truck is ran off a touch and go ( so a touch start )
truck has power windows
the rear wheel tub a steel that was hand build
the front inner fenders and radiator covers are custom made
the radiator is a custom built becool with 2 high output fans
all the seals are new
the rear end is built with a Yukon posi,gears and timkin bearing, and Dutchman axels
brakes are 14" wilwoods with 6 piston front 4 piston rear
all the fuel lines are braided stainless steel
the air ride is full accuair with e-level New endo tank, I-level, 2 air zenith ob2 compressors,
truck has 2 optima batts, all batt cable are 2 gauge
the trans cooler is a b&m with its own 10" fan,
2 avs batt. racks
mini starter
Fesler taillights
hydro boost
wildwood master
cpp spindels
front air bags are slam specialties
rear bags are ridetech sleeve bags
all the shocks are ride techs HQ
factory Gm radio delete plate
All Paint is PPG
all seam seal is SEM epoxy
bed liner is all SEM
Toyo tires
custom 20"american racing wheels
Custom built speaker box with a 12" t, rock ford t1000x4 Rockford components, Rockford 360 so everything runs off you phone or I pad
I can keep going on and on, I have drove the truck 59 miles the truck has been to 2 shows and taken isca awards, truck has been shoot for magazines and a few parts adds. there has been a lot done to this truck so much its hard to list it all. all brake and full lines are done in AN fittings. billet steering wheel on and on
The trucks Name is Battleship the story on the truck is me and my brother start this truck right after I started my company for a customer to make a long story short the customer never finished the truck I ended up buying it. My brother died of Cancer and it was the last truck he worked on. so I bought it and restarted the build on it. I watch my brother battle cancer for 2 years so when I was asked what I was going to name the build I said battleship. I will be given part of the money of the sell of this truck to the children's Hospital. the truck will also be post local and can cancel this at any time. I have lots of pic's of this build and we have done a video on the truck. we have changes a few thing since the video steering wheel is now black, and we built a different cold are intake with a corvette mass air flow sensor
youtube.com/watch?v=AsnZTfGTXYk
more picscarolinakustoms.com/products/1969-c10-2/