1964 1/2 Mustang Convertible D-code / 4-Speed Triple Black Restoration
1964 Ford Mustang for sale in Stantonville, Tennessee, United States
Condition: | Used |
Item location: | Stantonville, Tennessee, United States |
Make: | Ford |
Model: | Mustang |
Type: | Convertible |
Trim: | D-code |
Year: | 1964 |
Mileage: | 85,384 |
VIN: | 5F08D206467 |
Color: | Black |
Fuel: | Gasoline |
Transmission: | 4-Speed Manual |
Drive type: | rwd |
Interior color: | Black |
Options: | Convertible |
Vehicle Title: | Clear |
Want to buy? | Contact seller! |
Description for Ford Mustang 1964
TRIPLE BLACK BEAUTY
TRUE 1964 ½ MUSTANG CONVERTIBLE
D-CODE, -SPEED, OWER TOP
CAR WAS BUILT JULY 21, 964 AT THE DEARBORN, ICHIGAN PLANT.
You are bidding on this 1964 ½ mustang convertible. It has taken 3 ½ years to restore it from the ground up. This car still has all of its original drivetrain....289 engine, riginal 4 barrel carburetor matched to the 4-speed manual transmission. This car came from the factory with a power top and air conditioning. It also came with wiper washers.
Warranty Number: 5F08D206467
Year — 5 1965 (64 ½)
Plant — F Dearborn, ichgan
Body Series — 08 Convertible
Engine — D 289 4v V8
Unit 206467
Miscellaneous Vehicle Data
Body — 76A Convertible
Color — D Dynasty Green Metallic
Trim — 86 Black Crinkle Vinyl
Date — 21G July 21, 964
DSO — 21 Atlanta
Axle — 1 3.00:1
Trans — 5 4-Speed Manual
This car was purchased from the estate of JJ's (Jim Johnson) Mustang in Chattanooga, ennessee back in Spring of 2012. It was immediately disassembled for restoration.
The original 289 was removed and sent to Christians Machine Shop in Corinth, ississippi for complete rebuild. It has the following parts:
Elgin Cam
Sealed Power Pistons
Dana Moly Rings
King Engine Bearings
Clevite Cam Bearings
Melling Oil Pump
Cloyes Timing Set
New Water Pump
New Radiator
The following work was done:
Bored 30 over
Block and Heads cleaned and mag
Lifter Upgrade
Hardened Seats
Cleaned and Surfaced Exhaust Manifolds
Balanced Rotating Assembly
Surfaced Flywheel
Engine reassembled and painted
Filled with Schaeffer Break In Oil
Carburetor was sent off to be rebuilt and replated
4-Speed was inspected and lubed
After drive train was removed, he complete underside of car was stripped for the beginning of restoration process. It has had the front floor pans replaced and FULL factory replacement rear quarters. (Both quarters had rust in the lower rear). The rear end was rebuilt and basically everything else under the car is new.(gas tank, ll gas and brake lines, rake hardware and pads, mergency brake system). The front end was replaced, f anything was reused, t was stripped and powder coated. All underside metal repairs were completed and then it was painted/lightly undercoated. It also has new shocks, heels and tires!
The interior is all new (seat covers, oor panels, arpet, indow/door handlesand dash pad). The top was professionally installed 1 month ago (all new weather-stripping). It is a Robbins Stayfast Cloth top and it looks amazing!!! Power top works great!! It has a Mustang Brand Radio with new speaker, hich has the classic look but also has USB capabilities. The heater box was completely rebuilt with new coil, eals, ables and hoses. It still has the original front seat belts.
The exterior was professionally painted in basecoat/clearcoat system in Raven Black. The doors, eck lid, ood and front fenders are all original metal, hey were stripped down to metal at the beginning. It has all new weather-stripping and window felt. All side glass is original and the front windshield and seal is new. As you can see in photos, t has new door latches, nside and outside handles and new door hinges. It has new emblems, umpers, aillights, ront park lights, ront and rear valences, ack-up lights and a magnaflow dual exhaust. It also has new front and rear wiring harnesses.
The car starts right up and drives great, ou can drive it with 2 fingers. Engine runs smooth and it shifts through all gears perfectly. In addition to factory equipment, installed a set of gauges under the dash for oil pressure, emperature and charging. I also installed a Be Cool pusher fan on the new radiator to ensure the engine stays cool.
When I purchased car the underdash air unit was gone, ut it still had all of the other hardware. I kept everything in case someone wants to put it back original. The 3 groove lower pully is installed on engine.
Inspections are welcome, ust give me a call or email!
You must have 10 plus feedback to bid on this car! Please contact me with any other questions or to make other arrangements.
YOU TUBE VIDEOS:
Driving 1
https://www.youtube.com/watch?v=43mjC5KqJpk&feature=youtu.be
Driving 2
https://www.youtube.com/watch?v=G6lAiCQsJRY&feature=youtu.be
Walk Around
https://www.youtube.com/watch?v=1_tVKogBQDs&feature=youtu.be
We reserve the right to end auction at any time due to local advertisement.
Please don't hesitate to give us a call or an EBay message on any questions. Personal inspections are welcome!
731-646-0979
ONLY PAY THE DEPOSIT THROUGH PAYPAL PLEASE!!!!!!!!
NON-REFUNDABLE DEPOSIT IS DUE WITHIN 48 HOURS OF AUCTION END!!
BUYER IS RESPONSIBLE FOR SHIPPING. I HAVE DONE MY BEST TO ACCURATELY DESCRIBE THIS CAR;
NO WARRANTIES ARE EXPRESSED OR IMPLIED. CAR IS SOLD AS IS
The 1964 ½ Mustang is of course the first one, he car that set in motion the phenomenon known as the "pony car" . While the story of how it came to be is too long for this page, he car indeed has its place in the annals as the car that started it all.
The Mustang was unveiled in New York at the World's Fair in April of 1964. The first car was however first produced on March 9th, t the historic Rouge Complex in Dearborn, I. The press was first invited to see and drive the car, n April 13th just 4 days prior to the public unveiling on April 17th. What would immediately follow are the many legends and stories about a huge ad blitz and public race to Ford dealerships to see and buy the car. It was an exciting and rip roaring car launch like we rarely see today.
While the first Mustang was known as a 1964 ½ model, hey were labeled in the vehicle identification number (VIN), ody serial tags, nd documentation as a 1965. While this at first would seem to cause confusion, here are many defining features and specifications unique to this model.
For one, he 1964 ½ Mustang was only available in a coupe and convertible body style, he fastback did not arrive until the 1965 model year production. Also, here were only two plants up and running for the 1964 ½ models, he Rouge Complex in Dearborn and a now defunct assembly center in San Jose, A. Also there were model specific engines such as the 170 cubic inch six-cylinder and 260 cubic inch V8 that were replaced with larger more powerful engines for 1965.
1964 1/2 Mustang Specifications
1964 1/2 Mustang Engines 170 cid, -6, bbl, 05 hp 260 cid, 8, bbl, 64 hp 289 cid, 8, bbl, 10 hp 289 cid, 8, bbl, 71 hp "hi-po" | Code U F* D K |
* F-code 260 V8 was unique to 1941 1/2 Mustang, iscontinued into 1965 models | |
Transmissions 3-speed manual 4-speed manual (opt on 289 engines only) 3-speed automatic (C4) (not available on 289 hi-po) | Code 1 5 6 |
Brakes 6-cyl: Drum / Drum 9"³ dia. 8-cyl: Drum / Drum 10"³ dia. | |
Body Styles Coupe Convertible | Code 65 A 76 A |
Dimensions Curb weight — 6 cyl coupe Curb weight -6 cyl convertible Length Width Height Wheelbase | 2562 lb 2740 lb 181.6"³ 68.2"³ 51.1"³ 108"³ |
Assembly Plant Dearborn, I San Jose, A — starting in July, 964 | Code F R |